NOTE! This site uses cookies and similar technologies.

By viewing this page, you agree to the use of them.

I understand

ProX 800  ProX 950

ProX 800

Lowest part costs including lowest total cost of operation for high-capacity 3D printing.

The new state-of-the-art ProX™ 800 is the most advanced plastic part 3D printing technology for printing the highest precision, highest resolution, lowest cost and highest volume output across the widest range of addressable applications for prototyping, direct and indirect manufacturing.

The engineers at 3D Systems have implemented new laser print head and print material management systems to lower total cost of ownership for these workhorse printers. Through creative new architecture, the overall machine dimensions have been dramatically reduced, saving up to 50% floorspace without sacrificing print volume or maximum part size capabilities. Additional improvements boost printer utilization rates to new levels to maximize investment value.

Industry Parts


  Model: ProX 800
  Manufacturer: 3D Systemes
Net Build Volume Full: 650 x 750 x 550 mm (25.6 x 29.5 x 21.65 in); 414 I (109.3 U.S. gal)
  Half: 650 x 750 x 275 mm (25.6 x 29.5 x 10.8 in); 272 I (71.9 U.S. gal)
  Short: 650 x 750 x 50 mm (25.6 x 29.5 x 21.97 in); 95 I (25.09 U.S. gal)
Dimensions (W x D x H) 3D Printer Crated: 190 x 163 X 248 cm (75 X 64 X 98 in)
  3D Printer Uncrated: 137 x 160 x 226 cm (50 x 63 x 89 in)
Weight 3D Printer Crated: 1134 kg (2500 lbs)
  3D Printer Uncrated: 1724 kg (3800 lbs) not including MDM
Features Max Part Weight: 75 kg (165 lbs)
  Resolution: 0.00127 mm (0.0005 in) laser spot location resolution
  Accuracy: 0.025-0.05 mm (0.001-0.002 in) per inch of part dimension
  Materials: Builds with broadest range of 3D printing materials with exceptional mechanical properties
  Material Packaging: Material in clean, no-drip 10 kg cartridges. System auto fills print tray between builds
  Electrical Requirements: 200 - 240 VAC 50/60 Hz, single-phase, 30 amps
  Network Compatibility: Ethernet, IEEE 802.3 using TCP/IP and NFS
  3D Manage Hardware Recommendation: I5, 2.3 GHz with 8 GB RAM (Open GL support 1GB video RAM)
  Software Operating System: Windows® 7 and newer
  Input Data File Formats: STL and SLC
  Operating Temperature Range: 68-79 °F (20-26 °C)
  Noise: Not to exceed 70 dBA

Print3DPro and 3DManage™ Software

  • Easy build job set-up, submission and job queue management
  • Automatic part placement and build optimization tools
  • Part stacking and nesting capability
  • Extensive part editing tools
  • Automatic support generation
  • Job statistics reporting


  • Interchangeable quick change Material Deliverable Modules (MDMs) with integrated elevator and removable applicator
  • Manual offload cart
  • ProCureTM 750 or 1500 UV Finisher